Filter
Top Products
95
Printer Configuration and Adjustment
User Menus—SETTINGS Menu
4/8/14 ZT400 Series™ User Guide P1066582-002
Adjust the Tear-Off Position
If necessary, adjust the position of the media over the tear-off bar
after printing.
See Tear-Off Position on page 68 for more information.
Adjust the Print Width
Specify the width of the labels being used. The default value is the
maximum width for the printer, based on the printhead’s DPI
value.
See Print Width on page 69 for more information.
Select the Print Mode
Select a print mode that is compatible with your printer options.
See Print Mode on page 69 for more information.
Adjust the Label Left Position
If necessary, shift the print position horizontally on the label.
Positive numbers move the left edge of the image toward the
center of the label by the number of dots selected, while negative
numbers move the left edge of the image toward the left edge of
the label.
See Label Left Position on page 69 for more information.
Set the Reprint Mode
When reprint mode is enabled, you can reprint the last label printed
either by issuing certain commands or by pressing the
LEFT ARROW
on the control panel.
See Reprint Mode on page 70 for more information.
▼
TEAR OFF
0
▲
▼
PRINT WIDTH
832
▲
▼
PRINT MODE
TEAR OFF
▲
▼
LEFT POSITION
0
▲
▼
REPRINT MODE
OFF
▲