Filter
Top Products
Printer Configuration and Adjustment
Adjust Printer Settings
82
P1066582-002 ZT400 Series™ User Guide 4/8/14
RFID Read
Power
If the desired read power is not achieved through RFID tag calibration, a value may be
specified.
Accepted values:
0 to 30
Related ZPL command(s):
^RW
SGD command used:
rfid.reader_1.power.read
User menu item: RFID READ POWER on page 109
Printer web page: View and Modify Printer Settings > RFID Setup >
RFID READ PWR
RFID Write
Power
If the desired write power is not achieved through RFID tag calibration, a value may be
specified.
Accepted values:
0 to 30
Related ZPL command(s):
^RW
SGD command used:
rfid.reader_1.power.write
User menu item: RFID WRITE POWER on page 109
Printer web page: View and Modify Printer Settings > RFID Setup >
RFID WRITE PWR
RFID Valid
Counter
Resets the RFID valid label counter to zero.
Accepted values:
N/A
Related ZPL command(s):
~RO
SGD command used:
odometer.rfid.valid_resettable
User menu item: RFID VALID COUNT on page 110
Printer web page: N/A
RFID Void
Counter
Resets the RFID void label counter to zero.
Accepted values:
N/A
Related ZPL command(s):
~RO
SGD command used:
odometer.rfid.void_resettable
User menu item: RFID VOID COUNT on page 110
Printer web page: N/A
RFID Tag
Calibration
Initiate tag calibration for RFID media. (Not the same as media and ribbon calibration.)
Accepted values:
N/A
Related ZPL command(s):
^HR
SGD command used:
rfid.tag.calibrate
User menu item: RFID CALIBRATE on page 108
Printer web page: N/A
Table 4 • RFID Settings (Continued)