Filter
Top Products
Printer Configuration and Adjustment
Adjust Printer Settings
84
P1066582-002 ZT400 Series™ User Guide 4/8/14
Command
Character
The format command prefix is a two-digit hex value used as a parameter place marker in
ZPL/ZPL II format instructions. The printer looks for this hex character to indicate the start
of a ZPL/ZPL II format instruction.
Set the format command character to match what is used in your label formats.
Important • You cannot use the same hex value for the format command prefix,
control character, and delimiter characters. The printer must see different characters
to work properly. If you are setting the value through the control panel, the printer
will skip any value that is already in use.
Accepted values: 00 to FF
Related ZPL command(s):
^CC or ~CC
SGD command used: zpl.caret
User menu item: COMMAND CHAR on page 111
Printer web page: View and Modify Printer Settings > ZPL Control
Control
Character
The printer looks for this two-digit hex character to indicate the start of a ZPL/ZPL II
control instruction.
Set the control prefix character to match what is used in your label formats.
Accepted values: 00 to FF
Related ZPL command(s):
^CT or ~CT
SGD command used: zpl.control_character
User menu item: CONTROL CHAR on page 111
Printer web page: View and Modify Printer Settings > ZPL Control
Delimiter
Character
The delimiter character is a two-digit hex value used as a parameter place marker in
ZPL/ZPL II format instructions.
Set the delimiter character to match what is used in your label formats.
Accepted values: 00 to FF
Related ZPL command(s):
^CD or ~CD
SGD command used: zpl.delimiter
User menu item: DELIMITER CHAR on page 112
Printer web page: View and Modify Printer Settings > ZPL Control
Table 5 • Language Settings (Continued)