Filter
Top Products
Specifications
Media Specifications
176
P1066582-002 ZT400 Series™ User Guide 4/8/14
Media Specifications
Model ZT410 ZT420
Label length Minimum Non-RFID
Tear-off 0.5 in. (12.7 mm) 0.5 in. (12.7 mm)
Peel-off 0.5 in (12.7 mm) 0.5 in (12.7 mm)
Rewind 0.5 in. (12.7 mm) 0.5 in. (12.7 mm)
Cutter 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)
RFID Varies for each transponder type
Maximum 200 or 300 dpi 39 in. (991 mm) 39 in. (991 mm)
600 dpi 20 in. (508 mm) N/A
Maximum continuous media print
length
200 dpi 157 in. (3988 mm) 102 in. (2590 mm)
300 dpi 73 in. (1854 mm) 45 in. (1143 mm)
600 dpi 39 in. (991 mm) N/A
Label width Minimum Non-RFID 1.0 in. (25.4 mm) 2 in. (51 mm)
RFID Varies for each transponder type
Maximum Tear/Cutter 4.5 in. (114 mm) 7.0 in. (178 mm)
Peel/Rewind 4.25 in. (108 mm) 6.75 in. (171 mm)
Total thickness
(includes liner, if any)
Minimum 0.0023 in.
(0.058 mm)
0.0023 in.
(0.058 mm)
Maximum 0.010 in. (0.25 mm)
Maximum roll outside diameter 8 in. (203 mm)
on a 3-in. (76-mm) inside diameter core
Inter-label gap Minimum 0.079 in. (2 mm)
Preferred 0.118 in. (3 mm)
Maximum 0.157 in. (4 mm)
Ticket/tag notch size (width x length) 0.25 in. x 0.12 in.
(6 mm x 3 mm)
Hole diameter 0.125 in. (3.18 mm)
Notch or hole position (centered from
inner media edge)
Minimum 0.15 in. (3.8 mm)
Maximum 2.25 in. (57 mm) 3.5 in. (90 mm)
Density, in Optical Density Units (ODU) (black mark) > 1.0 ODU
Maximum media density ≤ 0.5 ODU
Transmissive media sensor (fixed position) 7/16 in. (11 mm) from inside edge