Filter
Top Products
Unpacking the Hardware
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide
19
Unpacking the Hardware
HANDLING PRECAUTIONS FOR
STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from damage due
to electrostatic discharge (ESD) during normal operation. When performing
installation procedures, however, take proper static control precautions to
prevent damage to equipment. If you are not sure of the proper static control
precautions, contact your nearest sales or service representative.
The DSLAM is shipped in a cardboard shipping container. Carefully remove
the unit from its shipping container and check for physical damage. If the unit
shows signs of shipping damage, notify your sales representative.
Package Contents
In addition to this installation guide, the shipping carton should contain:
z 4900 Series DSLAM
z Two sets of mounting brackets: one set suitable for a 19-inch (483 mm)
rack and one set suitable for a 23-inch (584 mm) rack (including Bay
Networks and Nortel)
z Other hardware (including cable ties, rubber feet)
z Installation guide
If anything is missing, notify your sales representative.
Before installing the DSLAM, read the Important Safety Instructions in the
beginning of this document.
Mounting Configurations
Three basic installation configurations are available:
z Rack mount – see Installing the Brackets for Rack Mounting on page 20
and Installing the DSLAM Into a Rack on page 21. In this guide, the term
rack refers to any rack, cabinet, frame, or bay suitable for mounting
telecommunications equipment.
z Wall mount – see Installing the DSLAM on a Wall on page 22.
z Shelf or desktop – see Installing the DSLAM on a Shelf or Desktop on
page 24.
!