Filter
Top Products
Cabling
26 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30
Installing the Micro Interface Module
A Micro Interface Module (MIM) is not required for operation. It provides
additional Ethernet, T1, or E1 uplink ports for the DSLAM, depending upon
the MIM model installed.
To install a MIM:
1 Using a flat-head screwdriver to loosen the fastening screws, remove the
blanking plate covering the MIM port on the front of the DSLAM.
2 Align the MIM with the module guides inside the DSLAM's MIM port.
3 Slide the MIM into the chassis until it is fully seated.
4 Secure the MIM by tightening the fastening screws on the MIM faceplate
with a flat-head screwdriver.
5 Cable the MIM as described in the MIM installation instructions.
05-17617
PWR
48 1.24A
MAX
1 2 3 4 5 6 7 8 9
13 14 15 16 17 18 19 20 21 22 23 24
10 11 12
MIM2 T1/E1
MIM
+
ACT
+
LK
ACT
LK