Filter
Top Products
Configuration Using the NMS
60 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30
IP Rules
To configure IP rules:
1 Click on the IP Rules tab. The IP Rules screen appears.
2 Select or enter the following parameters:
Parameter Description
Port Select a port from the drop-down list.
Activate Specify whether the rule is active.
IP Range Specify the range of IP addresses that constitutes
a match for this rule.
Allow Tag/Untag on
Ingress Pkt.
Specify tag or untag. Tag indicates that ingress
packets already matched to the IP Rule must
have a VLAN tag to be further considered;
packets without a VLAN tag will be dropped.
Untag indicates that ingress packets already
matched to the IP Rule cannot have a VLAN tag
to be further considered; packets with a VLAN
tag will be dropped.