Filter
Top Products
Advanced Configuration
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide
39
Advanced Configuration
Use the Advanced Configuration screen to set the unit’s system name and
other parameters.
To configure advanced system parameters:
1 From the home screen, click on the Advanced Config button. The
Advanced Configuration screen appears.
2 Select or enter the following parameters:
3 Click on Submit.
Parameter Description
System Name Specify a name to identify the DSLAM.
System Location Specify location information to further identify
the DSLAM.
IP Range Specify a range of IP addresses from which
management traffic is accepted. If your PC’s IP
address is outside the range, contact with the
DSLAM will be lost when you click on Submit.
Communication Tools Click in the On or Off buttons to enable or
disable TFTP and Telnet on this DSLAM.