Filter
Top Products
CLI Commands
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide
79
MAC [dump,clear]
MGMT_PORT_UPLINK [on,off]
Allows the PHYSICAL management port to be an UPLINK port.
MIM [dump,reset_stats]
PHY PHY DEBUG args->cmd phy_num reg val
PRIORITY [0–7]
PROTOCOL [ALL,IP,VALUE]
Changes the protocol filter.
RESET None.
SNMP_READONLY_COM-
MUNITY
None. You will be prompted for values.
SNMP_READWRITE_COM-
MUNITY
None. You will be prompted for values.
STATIC_MAC xx:xx:xx:xx:xx:xx
Sets static mac addresses.
SUBNET_MASK xxx.xxx.xxx.xxx
SUPERUSER_PASSWORD None. You will be prompted for values.
SYSTEM_NAME [system_name]
Changes the DSLAM System Name and CLI Prompt.
VLAN_RANGE VLAN_RANGE:
SHOW: [ALL,1–10]
SET: [1–10]
VLAN_ID: [0–4085]–[0–4085]
Table 4: Set and Show Command Items and Values (Sheet 3 of 3)
Items Values