Filter
Top Products
SNMP Configuration
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide
41
SNMP Configuration
Use the SNMP Configuration screen to enable traps and establish trap
managers.
To configure SNMP parameters:
1 From the home screen, click on the SNMP Config button. The SNMP
Configuration screen appears.
2 Select or enter the following parameters:
3 Click on Submit.
Parameter Description
SNMP Notification IP Specify the IP addresses of hosts that are to
receive trap notifications.
SNMP Traps Click in the check boxes to enable or disable
SNMP traps:
z snmpAuthentication
z snmpEnvironment
z snmpColdStart
z snmpModule/Port