Filter
Top Products
Installation
22 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30
3 Insert and tighten the screws in the top screw positions, then tighten the
bottom screws.
Installing the DSLAM on a Wall
Wall mounting requires two wood screws suitable for the weight of the fully
cabled unit. These are not included. Use at a minimum 1/4-inch (6 mm)
diameter screws in 3/4-inch (19 mm) plywood (not drywall).
To install the DSLAM on a wall:
1 Identify the flat-head screws provided in the hardware kit and the brackets
suitable for a 23-inch rack. Two screws are required for each bracket.
2 Lay the unit upside down on a flat surface.
3 Locate the pair of threaded holes on the right side of the unit. Attach a
bracket using the flat-head screws.
05-17616
POTS
ADSL2+
PW
R
48 1.24A
M
A
X
1 2 3 4 5 6 7 8 9
13 14 15 16 17 18 19 20 21 22 23 24
10 11 12
CO
M
Lnk
A
ct
Dup
10/10/1000
SFP
MIM
2 T1/E1
M
IM
+
ACT
4929
+
LK
ACT
LK