Filter
Top Products
Configuration Using the NMS
38 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30
Management Configuration
Use the Management Configuration screen to set the unit’s IP address and
other management parameters.
To configure management parameters:
1 From the home screen, click on the Management Config button. The
Management Configuration screen appears.
2 Select or enter the following parameters:
3 Click on Submit.
Parameter Description
IP Address Specify the management IP address for the
DSLAM.
Subnet Mask Specify the subnet mask for the IP address.
Gateway Specify the first-hop gateway address.
Inband MGMT Check this box if you will use inband
management through MIM ports or ADSL
ports.
VLAN Id Specify a VLAN identifier for inband
management.
Priority Specify a priority (0–7) for management traffic.