Filter
Top Products
Installing the DSLAM Into a Rack
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide
21
Installing the DSLAM Into a Rack
Use:
z #10-32 mounting screws for rails with threaded screw holes
z #12-24 mounting screws and self-retaining nuts for rails with unthreaded
screw holes
To install the DSLAM into a rack:
1 Determine where in the rack you will mount the DSLAM. If your rack
does not have threaded screw holes, slip self-retaining nuts onto the rails
where the DSLAM will be fastened.
2 Place the unit so that the brackets rest against the front of the rails. Insert
screws in the bottom screw positions and hand-tighten them.
02-17070