Filter
Top Products
Cabling
30 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30
Connecting the COM Port
You can use the COM port to directly connect a PC, terminal, or modem,
permitting use of the Command Line Interface (CLI).
Connecting a Terminal or PC to the COM Port
To connect a terminal or PC to the COM port:
1 Configure the terminal or terminal emulation program to use the
following parameters:
— Maximum speed: 9600 bps
— Data bits: 8
— Parity: None
— Flow Control: None
— Stop bits: 1
2 Determine and procure the proper Data Terminal Equipment (DTE) cable
type. The COM port requires an RJ45-type plug connector. The other
connector depends on the serial port on your terminal or PC. See DB9 to
RJ45 Adapter Pinouts in Appendix A, Connectors and Pin Assignments.
3 Connect the modular plug of your cable to the COM port socket.
4 Connect the other end of the cable to the serial port of your terminal or
PC.
05-17620
POTS
ADSL2+
COM
Lnk
Act
Dup
10/10/1000
SFP
4929