ZyXEL Communications 153X Network Router User Manual


 
Prestige 153/153X WAN Bridge/Routers
IPX Configuration 6-3
6.2 Prestige in an IPX Environment
There are two different scenarios in which your Prestige is deployed:
l LAN with a server (server side)
l LAN without a server (client side)
Figure 6-1 illustrates a typical IPX LAN-to-LAN application.
Figure 6-1. Prestige in an IPX Environment
6.2.1 Prestige on LAN with Server
If your Prestige is on a LAN with a seed router, you do not need to configure the LAN network
numbers. Your Prestige will learn the network number from the seed router and add the routes to
its routing table.
6.2.2 Prestige on LAN without Server
Each IPX network must have a seed router. If you only have NetWare clients on your network,
then you must configure the Prestige as a seed router and set up unique network numbers for each
frame type enabled using the Ethernet Setup Menu.
Prestige 153/153X
Prestige 153/153X
Seed Router (Client Side)
Assigns Network Number
Not Seed Router (Server Side)
Learns Network Number
NetWare
Server
NetWare
Clients