Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
8-6 Dial-in Server Configuration
Table 8-2. Default Dial-in Setup Fields (continued)
Field Description Option
Multiple Link Options: Max
Port
Enter the maximum number of ports in an MP bundle
between your Prestige and a remote dial-in user.
Default = 1
Callback Budget
Management: Allocated
Budget (min)
This field sets the budget callback time for all remote
dial-in users. The default for this field is [0] for no budget
control.
Default = 0
Callback Budget
Management: Period (hr)
This field sets the time interval to reset the above
callback budget control.
Dial-In IP Address Supplied
By: Dial-in User
If set to [Yes], the Prestige will allow a remote host to
specify its own IP address.
If set to [No], the remote host must use the IP address
assigned by your Prestige from the IP pool, configured
below. This is to prevent the remote host from using an
invalid IP address and potentially disrupting the whole
network.
(Default = Yes)
[Yes/No]
Dial-In IP Address Supplied
By: IP Pool
This field tells your Prestige to provide the remote host
with an IP address from the pool. This field is required if
Dial-In IP Address Supplied By: Dial-in User is set to
[No]. You can configure this field even if Dial-in User is
set to [Yes], in which case your Prestige will accept the
IP address if the remote peer specifies one; otherwise,
an IP address is assigned from the pool.
[Yes/No]
(Default = No)
IP Pool: IP Start Addr This field is applicable only if you selected [Yes] in the
Dial-In IP Address Supplied By: IP Pool field.
The IP pool contains contiguous IP addresses and this
field specifies the first one in the pool.
IP Count (1-3) In this field, enter the number ([1], [2], or [3]) of
addresses in the IP Pool. For example, if the starting
address is 192.168.135.5 and the count is [2], then the
pool will have 192.68.135.5 and 192.68.135.6
[1], [2], [3]