Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
7-4 Bridging Setup
Table 7-2 describes the bridging-dependent parameters in the Remote Node Profile and Network
Layers menus.
Table 7-2. Remote Node Bridge Options
Field Description
Bridge Make sure this field is set to [Yes].
Edit IP/IPX/Bridge Press the space bar to change it to [Yes] and press [Enter] to go to the
Network Layer Options Menu.
Dial-On-Broadcast This field is necessary for your Prestige on the caller side LAN. When set
to [Yes], any broadcasts coming from the LAN will trigger your Prestige to
make a call to this remote node. If it is set to [No], your Prestige will not
make the outgoing call.
Ethernet Addr Timeout (min) In this field, enter the time (number of minutes) that you wish your Prestige
to retain the Ethernet Addr information in its internal tables while the line is
down. If this information is retained, your Prestige will not have to
recompile the tables when the line is brought back up.
Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to Menu 11.1.
Then press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc]
to cancel.