Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
Remote Node Configuration 4-11
Table 4-2 describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.
Table 4-2. Remote Node PPP Options Menu Fields
Field Description Option
Select the vendor-specific encapsulation for the link.
There are two options in this field.
l Standard PPP - Standard PPP encapsulation
will be used.
[Standard PPP]
Encapsulation
l CISCO PPP - Cisco PPP encapsulation will be
used.
[CISCO PPP]
Compression Turn on/off Stac data compression. The default for
this field is Off.
[On/Off]
(Default = Off)
Multiple Link Options:
BOD Calculation Select the direction of the traffic you wish to use in
determining when to add or subtract a link. The
default for this field is [Transmit or Receive].
Default =
Transmit or
Receive
Min. Ports Enter the minimum number of ports for this remote
node.
Max. Ports Enter the maximum number of ports for this remote
node.
Target Utility for 2
nd
Port
(kbps)
Enter the two thresholds separated by a [-] for
subtracting and adding the second port.
Default=10-20
Bandwidth Increment
for Additional Ports
(Kbps)
Enter the Bandwidth Increment to define the two
thresholds for subtracting and adding the third port.