Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
Internet Access 3-9
Table 3-4 contain instructions on how to configure your Prestige for Internet access.
Table 3-4. Internet Access Setup Menu Fields
Field Description Observation
ISP's Name Enter the name of your Internet Service Provider. (This information
is for identification purposes only.)
Myisp
ISP IP Addr Enter the IP Address of the remote gateway at the ISP's site. If you
do not have this data, just leave it blank.
(optional)
Connection Type Select [Switch] if you connect to the ISP through a dial-up line;
select [Leased] if through a leased line.
Space-bar to
toggle
[Switch/Leased]
Leased Ports If [Leased] is selected in Connection Type, enter the WAN port
numbers in this field. Leased Ports can be a single port: (1 to 3),
or any combination of ports: (e.g., 1,2,3 or 1,3 etc). All leased line
links specified here are bundled in one connection to your ISP.
The Connection Type of these WAN ports must also be specified
as [Leased] in Menu 2.
Pri(mary) Phone # The first number your Prestige will dial to connect to the ISP if the
connection is a dial-up line.
(required)
Sec(ondary) Phone
#
If the primary phone number is busy or does not answer, your
Prestige will call the Secondary Phone number if specified.
(optional)
My Login Name Enter the login name assigned to you by your ISP. (required)
My Password Enter the password associated with the login name above. Note
that this login name/password pair is only for your Prestige to
connect to the ISP's gateway. For TCP/IP applications, e.g., FTP,
you will need a separate login name and password for each
server.
(required)