Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
13-16 System Maintenance
13.8 Command Interpreter Mode
This option allows you to enter the command interpreter mode. A list of valid commands can be
found by typing [help] at the command prompt. For more detailed information, check the ZyXEL
Web site or send an e-mail to the ZyXEL Support Group.
13.9 Call Control
The Prestige provides two call control functions: budget management and blacklist.
The budget management function allows you to set a limit on the total outgoing call time of the
Prestige over a period of time. When the total outgoing call time exceeds the limit, the current call
will be dropped and any future outgoing calls will be blocked.
The blacklist function prevents the Prestige from re-dialing to an unreachable phone number. It is
a list of phone numbers, up to a maximum of 14, to which the Prestige will not make an outgoing
call. If the Prestige tries to dial to a phone number and fails a certain number of times
(configurable in Menu 24.9.1), then the phone number is put in the blacklist. You will have to
enable the number manually before the Prestige will dial that number again.
To enter the call control menu, select option [9. Call Control] in Menu 24 to go to Menu 24.9 -
System Maintenance - Call Control, as shown in Figure 13-13.
Figure 13-13. Menu 24.9 - System Maintenance - Call Control
Menu 24.9 - System Maintenance - Call Control
1. Blacklist
2. Budget Management
3. Call History
Enter Menu Selection Number: