Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
2-22 Hardware Installation & Initial Setup
Refer to Table 2-7 for details on how to fill in the AT commands fields.
Table 2-7. Advanced WAN Port Setup AT Commands Fields
Field Description Default
AT Command Strings:
Dial Enter the AT Command string to make a call. [atdt]
Drop Enter the AT Command string to drop a call. [~] represents a one
second wait.
[+++ath]
Answer Enter the AT Command string to answer a call. [ata]
Drop DTR When Hang
Up
When [Yes] is selected, your Prestige will drop the DTR signal
after sending out [AT Command String: Drop].
Toggle
[Yes/No]
(Default=[Yes])
AT Response Strings:
CLID (Calling Line
IDentification)
Enter the keyword preceding the CLID in the response from the
WAN device. CLID is required for CLID authentication.
[NMBR]
Called ID Enter the keyword preceding the dialed number. [TO]
Speed Enter the keyword preceding the connection speed. [CONNECT]
2.8.3.1 AT Command Strings
For regular telephone lines, the default “Dial” string tells the modem that the line uses tone
dialing. If your switch still requires pulse dialing, change the string to “atdp”. For ISDN lines,
there are far more protocols and operational modes. Please consult the documentation of your
TA, for you may need additional commands in both “Dial” and “Init” strings.