Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
Hardware Installation & Initial Setup 2-21
2.8.3 Prestige 153/153X Advanced WAN Port Setup
The Advanced WAN Port Setup Menu allows you to configure additional AT Commands for the
WAN device and the call control parameters. Follow the common Advanced WAN Port Setup
procedure in this section for both Prestige 153 and 153X
Step 1. In Menu 2.1, move the cursor to the Advanced Setup field and press the space bar to
select [Yes], then press [Enter].
Step 2. When Menu 2.1.1 appears, fill in the appropriate AT commands and call control
parameters for the WAN device connected to the WAN port, as shown in Figure 2-13.
Figure 2-13. Menu 2.1.1 - Advanced WAN Port Setup
Menu 2.1.1 - Advanced WAN Port Setup
AT Command Strings:
Dial= atd
Drop= +++ath
Answer= ata
Drop DTR When Hang Up= Yes
AT Response String:
CLID= NMBR
Called Id= TO
Speed= CONNECT
Call Control
Dial Timeout(sec)= 60
Retry Counter= 0
Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Call Back Delay(sec)= 15
Enter here to CONFIRM or ESC to CANCEL: