Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
4-4 Remote Node Configuration
Table 4-1. Remote Node Profile Menu Fields for Dial-up Lines (continued)
Field Description Options
Incoming: Rem Node
Login Name
Enter the login name that this remote node will use when
it calls your Prestige.
The login name in this field combined with the Rem Node
Password will be used to authenticate this node.
Incoming: Rem Node
Password
Enter the password used when this remote node calls
your Prestige.
Incoming: Rem CLID This field is applicable only if [Call Direction] is either
[Both] or [Incoming]. Otherwise, an [N/A] appears in the
field.
This is the Calling Line ID (the telephone number of the
calling party) of this remote node.
If you enable the CLID Authen field in Menu 13 - Default
Dial In, your Prestige will check the CLID in the incoming
call against the CLIDs in the database. If no match is
found and CLID Authen is Required, the call will be
dropped.
Incoming: Call Back This field is applicable only if [Call Direction] is [Both].
Otherwise, an [N/A] appears in the field.
This field determines whether or not your Prestige will call
back after receiving a call from this remote node.
If this option is enabled, your Prestige will disconnect the
initial call from this node and call it back at the Outgoing
Primary Phone Number (see below).
[Enable]
[Disable]
Outgoing: My Login
Name
This is a required field [?] if [Call Direction] is either [Both]
or [Outgoing]. Enter the login name for your Prestige
when it calls this remote node.