Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
4-16 Remote Node Configuration
Table 4-4 describes the fields in Menu 11.1.2 - Remote Node Profile for Leased Line that are
specific to leased lines.
Table 4-4. Remote Node Profile Menu Fields for Leased Lines
Field Description Option
Connection Type: [Leased] Use space bar to toggle [Switch/Leased], select
[Leased] and press [Enter].
[Leased]
Leased Port(s) Enter the Wan Port numbers of this remote node for a
Leased Line connection. Leased Port(s) can be a
single port: (1 to 3), or any combination of ports: e.g.,
1,2,3 or 1,3 or any other combination.
The Connection Type of these WAN Ports must be
set to [Leased] in Menu 2 WAN Port Setup. All WAN
Ports specified in this remote node are bundled in
one connection.
Incoming: Rem Node Login
Name
(*for backup line only)
Enter the login name this remote node uses when it
calls into your Prestige. The login name in this field
combined with the Rem Node Password will be used
to authenticate the incoming calls from this node.
Incoming: Rem Node
Password
(*for backup line only)
Enter the password used when this Remote Node
calls into your Prestige.
Outgoing: My Login Name
(*for backup line only)
This is a required field [?] if [Call Direction] is either
[Both] or [Outgoing]. Enter the login name for your
Prestige when it calls this remote node.
Outgoing: My Password
(*for backup line only)
This is a required field [?] if [Call Direction] is either
[Both] or [Outgoing]. Enter the password for your
Prestige when it calls this remote node.