Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
IPX Configuration 6-9
Table 6-2describes the IPX protocol-dependent parameters of the remote node Setup.
Table 6-2. Remote Node Novell IPX Options
Field Description Option
Dial-On-Query This field is necessary for your Prestige on the client side. When set
to [Yes], any Get Service SAP or RIP broadcasts will trigger your
Prestige to make a call to that remote node.
[Yes/No]
Rem LAN Net # In this field, enter the internal network number of the NetWare server
on the remote LAN.
My WAN Net # In this field, enter the network number of the WAN link. If you leave
this field as [00000000], your Prestige will determine automatically the
network number through negotiation with the PPP peer.
[00000000]
(default)
Hop Count This field indicates the number of intermediate networks that must be
passed through to reach the remote node.
[1]
(default)
Tick Count This field indicates the time-ticks required to reach the remote node. [2] (default)
W/D Spoofing
(min)
This field is for the Prestige on the server side. Your Prestige can
spoof a response to a server’s WatchDog request after the connection
is dropped. In this field, type in the time (number of minutes) that you
want your Prestige to spoof the WatchDog response.
SAP/RIP Timeout
(min)
This field indicates the amount of time that you want your Prestige to
maintain the SAP and RIP entries learned from this remote node in its
internal tables after the connection has been dropped. If this
information is retained, then your Prestige will not have to get the SAP
information when the line is brought back up. Enter the time (number
of minutes) in this field.
Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to Menu 11.1.
Then press [Enter] at the message [Press ENTER to Confirm] to save your configuration, press [Esc] to
cancel.