Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
Dial-in Server Configuration 8-5
Table 8-2. Default Dial-in Setup Fields
Field Description Option
Telco Options: CLID
Authen
This field sets the CLID authentication parameter for all
incoming calls. There are three options for this field:
l None - No CLID is required.
l Required - CLID must be available, or the Prestige
will not answer the call.
l Preferred - If the CLID is available then CLID will be
used; otherwise, authentication is performed in
PPP negotiation.
[None]
[Required]
[Preferred]
PPP Options: Recv. Authen This field sets the authentication protocol for incoming
calls. Individual user names and passwords are
configured in the next section (Remote users/Dial-in
Users Setup). Options for this field are:
l CHAP/PAP – Your Prestige will try CHAP first, but
PAP will be used if CHAP is not available.
l CHAP - Use CHAP only.
l PAP - Use PAP only.
l None - Your Prestige will try CHAP first, but no
authentication is required if CHAP is not available.
[CHAP/PAP]
[CHAP]
[PAP]
[None]
PPP Options: Mutual
Authen
Some vendors, e.g., Cisco, require mutual
authentication, i.e., the node that initiates the call will
request a user name and password from the far end that
it is dialing to. If the remote node that is dialing in
implements this type of authentication, set this field to
Yes.
[Yes/No]
PAP Login This field is applicable only if the Mutual Authen. Field is
set to [Yes]. Enter the login name for your Prestige. This
field does not apply to CHAP authentication.
PAP Password This field is applicable only if the Mutual Authen. Field is
set to [Yes]. Enter the PAP password for your Prestige.
This field does not apply to CHAP authentication.