Filter
Top Products
Prestige 153/153X WAN Bridge/Routers
2-20 Hardware Installation & Initial Setup
Table 2-6. Prestige 153X Sync/Async WAN Port Setup Menu Fields (continued)
Field Description Example
Phone
Number
Enter the telephone number assigned to your line by your telephone
company. Note that your Prestige only accepts digits; do not include
dashes and spaces in this field.
Clock Source Use the space bar to select the clock source of the sync device. Default
is [External], and the Port Speed field is not applicable ([N/A]).
Space-bar to
toggle
[Internal]
[External]
Device Type Use the space bar to select one of the following: Modem / ISDN TA /
X.25 PAD / 56K Modem that specifies the WAN device type. This field is
not applicable if the Connection Type is set to [Leased].
Space-bar to
toggle
[Modem]
[ISDN TA]
[X.25 PAD]
[56K Modem]
Port Speed Use the space bar to select the speed between the Prestige and the
WAN device.
Available speeds for Async Device are:
[9600] / [19200] / [38400] / [57600] / [115200] / [230400] bps
Available speeds for Sync Device are:
[2400] / [4800] / [9600] / [14400] / [19200] / [28800] / [56000] / [64000] /
[128000] / [192000] / [256000] bps
[115200]
(default)
AT Command
String: Init
Enter an AT command string to initialize the WAN device. When the
Connection Type is set to [Switch], you must include AT command
“s0=0” to disable auto-answer; your Prestige will decide when to answer
the incoming call.
(Default: ats0=0)
Advanced
Setup
To edit the Advanced Setup for this WAN port, move the cursor to this
field, use the space bar to select [Yes] and press [Enter]. This will bring
you to Menu 2.1.1 - Advanced Setup.
[Yes/No]
When you complete this menu, press [Enter] to save your configuration, or Esc to cancel. After you press
[Enter], the Prestige uses the information you have saved to initialize the WAN Port and the connected
modem/ISDN-TA/CSU-DSU.