Filter
Top Products
Appendix A Product Specifications
ES-2024 Series User’s Guide
239
The following list, which is not exhaustive, illustrates the standards supported in the Switch.
Clustering Act as clustering slave or master
24 slaves can be managed in a cluster at most
System management Configuration by console/Telnet/web
Firmware upgrade by FTP/web/console
Configuration backup and restore by FTP/web/console
System management access control
System clock by manual setup or NTP
SNMP v2c / v3
Telnet (up to 9 concurrent sessions)
RMON group 1,2,3,9
ICMP echo/echo reply
Cisco-like CLI commands
Text based configuration file
Administration user management
Syslog
Daylight saving time support
802.3ah OAM
Loop guard
Table 100 Standards Supported
STANDARD DESCRIPTION
RFC 826 Address Resolution Protocol (ARP)
RFC 867 Daytime Protocol
RFC 868 Time Protocol
RFC 894 Ethernet II Encapsulation
RFC 1112 Internet Group Management Protocol v1
RFC 1155 SMI
RFC 1157 SNMPv1: Simple Network Management Protocol version 1
RFC 1213 SNMP MIB II
RFC 1305 Network Time Protocol (NTP version 3)
RFC 1441 SNMPv2 Simple Network Management Protocol version 2
RFC 1493 Bridge MIBs
RFC 1643 Ethernet MIBs
RFC 1757 RMON
RFC 1901 SNMPv2c Simple Network Management Protocol version 2c
RFC 2131, RFC 2132 Dynamic Host Configuration Protocol (DHCP)
RFC 2138 RADIUS (Remote Authentication Dial In User Service)
RFC 2139 RADIUS Accounting
RFC 2236 Internet Group Management Protocol, Version 2.
RFC 2475 DSCP to IEEE 802.1p priority mapping
RFC 2674 SNMP v2, v2c
P-BRIDGE-MIB, Q-BRIDGE-MIB
Table 99 Firmware Specifications (continued)
FEATURE SPECIFICATION