Filter
Top Products
Chapter 7 Basic Setting
ES-2024 Series User’s Guide
72
7.6.1 IP Interfaces
The Switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.1. The subnet mask specifies the network number portion of an IP
address. The factory default subnet mask is 255.255.255.0.
Configure IP addresses for accessing and managing the Switch from the ports belonging to the
pre-defined VLAN(s). See Table 99 on page 237 for how many IP addresses you can
configure.
Figure 28 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 11 Basic Setting > IP Setup
LABEL DESCRIPTION
Domain Name
Server
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
Default Management IP Address
Configure the fields to set the default management IP address.
DHCP Client Select this option if you have a DHCP server that can assign the Switch an IP
address and subnet mask, a default gateway IP address and a domain name server
IP address.