Filter
Top Products
ES-3124PWR Ethernet Switch
29-14 Introducing the Commands
Table 29-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
<ip> <mask>
<next-hop-ip>
[metric <metric>]
[name <name>]
[inactive]
Sets the metric of a static route or
deactivates a static route.
name-server <ip> Sets the IP address of a domain
name server.
address default-
gateway
<ip> Sets the default gateway’s IP
address for the out-of-band
management port.
address <ip> <mask> Sets the IP address and subnet
mask of the out-of-band
management port.
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
Configures a static MAC address
forwarding rule.
name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
inactive
Disables a static MAC address
forwarding rule.
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
Configures a static MAC address
port filtering rule.
name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
inactive
Disables a static MAC address
port filtering rule.
mirror-port Enables port mirroring.
<port-num> Enables port mirroring on a
specified port.
lacp Enables Link Aggregation Control
Protocol (LACP).
system-priority <1-65535> Sets the priority of an active port
using LACP.
trunk interface <port-
list> timeout
<lacp-timeout>
Defines the port number and LACP
timeout period.
<T1|T2|T3|T4|T5|T6> Activates a trunk group.
<T1|T2|T3|T4|T5|T6>
lacp
Enables LACP for a trunk group.