Filter
Top Products
ES-3124PWR Ethernet Switch
Hardware Connections 3-7
Table 3-2 ES-3124PWR: LED Descriptions
LED COLOR
STATUS DESCRIPTION
10 Green Blinking
ON
OFF
The system is transmitting/receiving to/from an Ethernet device.
The port is connected at 10 Mbps.
The port is not connected at 10 Mbps or to an Ethernet device.
100 Amber Blinking
ON
OFF
The system is transmitting/receiving to/from an Ethernet device.
The port is connected at 100 Mbps.
The port is not connected at 100 Mbps or to an Ethernet device.
3.4 Configuring the ES-3124PWR
You may use the embedded web configurator or command line interface to configure the ES-3124PWR. If you’re
using the web configurator, you need Internet Explorer 5.5 and later or Netscape Navigator 6 and later.
You can access the command line interface using a terminal emulation program on a computer connected to the
switch console port (see section 3.1.1) or access the switch via an Ethernet port using Telnet.
The next part of this guide discusses configuring the ES-3124PWR using the web configurator.