Filter
Top Products
ES-3124PWR Ethernet Switch
Introducing the Web Configurator 4-5
Table 4-3 Navigation Panel Sub-link Descriptions
LABEL DESCRIPTION
Bandwidth Control
This link takes you to screens where you can limit the maximum allowable bandwidth for
incoming and/or out-going traffic flows on a port.
Broadcast Storm
Control
This link takes you to a screen to set up broadcast filters.
Mirroring
This link takes you to screens where you can copy traffic from one port or ports to another
port in order that you can examine the traffic from the mirrored port without interference
Link Aggregation
This link takes you to a screen where you can logically trunk physical links to form one
logical, higher-bandwidth link.
Port Authentication
This link takes you to a screen where you can configure RADIUS (Remote Authentication
Dial-In User Service), a protocol for user authentication that allows you to use an external
server to validate an unlimited number of users.
Port Security
This link takes you to a screen where you can activate MAC address learning and set the
maximum number of MAC addresses to learn on a port.
Access Control
This link takes you to screens where you can change the system login password and
configure SNMP and remote management.
Queuing Method
This link takes you to a screen where you can configure strictly priority or weighted fair
scheduling with associated queue weights for each port.
Classifier
This link takes you to a screen where you can configure classifiers.
Policy Rule
This link takes you to a screen where you can configure policy rules.
VLAN Stacking
This link takes you to a screen where you can configure VLAN stacking.
DHCP Relay
This link takes you to a screen where you can configure DHCP relay information and
specify the DHCP server(s).
Routing Protocol
Static Routing
This link takes you to screens where you can configure static routes. A static route
defines how the ES-3124PWR should forward traffic by configuring the TCP/IP
parameters manually.
Management
Maintenance
This link takes you to screens where you can perform firmware and configuration file
maintenance as well as reboot the system.
Diagnostic
This link takes you to screens where you can view system logs and test port(s).
Cluster Management
This link takes you to a screen where you can configure clustering management and view
its status.
MAC Table
This link takes you to a screen where you can view the MAC addresses (and types) of
devices attached to what ports and VLAN IDs.
ARP Table
This link takes you to a screen where you can view the MAC addresses – IP address
resolution table.
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default Administrator password in the Logins
screen. Click Advanced Application, Access Control and then Logins to display the next screen.