Filter
Top Products
ES-3124PWR Ethernet Switch
System Status and Port Details 5-5
The following table describes the labels in this screen.
Table 5-2 Status: Port Details
LABEL DESCRIPTION
Port Info
Port NO.
This field identifies the Ethernet port described in this screen.
Link
This field shows whether the Ethernet connection is down, and the speed/duplex mode. It also
shows the cable type (Copper or Fiber) for the combo ports.
Status
This field shows the training state of the ports. The states are FORWARDING (forwarding),
which means the link is functioning normally or STOP (the port is stopped to break a loop or
duplicate path).
PD Max Current
(mA)
This field is not available for the Gigabit and mini-GBIC ports.
This field shows the maximum current a powered device can get from the switch. If the powered
device’s power consumption exceeds the maximum power offered by the switch, the switch
stops sending power.
The switch can provide up to 351.36mA current to one PD connected to each 10/100Mbps
Ethernet port and up to a total of 375W power to all PDs connected to the switch.
PD Consumption
(W)
This field is not available for the Gigabit and mini-GBIC ports.
This field shows the power consumption of the powered device connected to the port.
LACP
This field shows if LACP is enabled on this port or not.
TxPkts
This field shows the number of transmitted frames on this port
RxPkts
This field shows the number of received frames on this port
Errors
This field shows the number of received errors on this port.
Tx KBs/s
This field shows the number kilobytes per second transmitted on this port.
Rx KBs/s
This field shows the number of kilobytes per second received on this port.
Up Time
This field shows the total amount of time the connection has been up.
Tx Packet
The following fields display detailed information about frames transmitted.
TX Packets
This field shows the number of good frames (unicast, multicast and broadcast) transmitted.
Multicast
This field shows the number of good multicast frames transmitted.
Broadcast
This field shows the number of good broadcast frames transmitted.
Pause
This field shows the number of 802.3x Pause frames transmitted.
Rx Packet
The following fields display detailed information about frames received.
RX Packets
This field shows the number of good frames (unicast, multicast and broadcast) received.