Filter
Top Products
ES-3124PWR Ethernet Switch
30-2 Command Examples
Figure 30-2 show hardware-monitor Command Example
30.2.3 show ip
Syntax:
show ip
This command displays the IP related information (such as IP address and subnet mask) on all switch interfaces.
Figure 30-3 show ip Command Example
30.2.4 show logging
This command is not available in User mode.
ras> show ip
Out-of-band Management IP Address = 192.168.0.1
VPS00, Device Type: Ethernet, Idle/Timeout: disable
Number of Interface : 1
enif0 : IP[192.168.0.1], Netmask[255.255.255.0], VID[0]
VPS01, Device Type: Switch, Idle/Timeout: disable, [MGMT VPS], [CNTL VPS]
Number of Interface : 2
cmif0 : IP[127.0.0.1], Netmask[255.0.0.0], VID[1]
swif0 : IP[192.168.1.1], Netmask[255.255.255.0], VID[1]
ras>
ras> show hardware
-
monitor c
Temperature Unit : (c)
Temperature Current MAX MIN Threshold Status
CPU 34.0 34.5 31.0 85.0 Normal
MAC 35.5 35.5 32.0 85.0 Normal
PHY1 32.0 32.0 29.0 85.0 Normal
PHY2 31.5 32.0 29.5 85.0 Normal
PHY3 30.5 31.0 29.5 85.0 Normal
ENV 33.0 33.0 29.0 85.0 Normal
FAN Speed(RPM) Current MAX MIN Threshold Status
FAN1 5670 5716 5625 2750 Normal
FAN2 5625 5716 5580 2750 Normal
FAN3 5763 5859 5716 2750 Normal
FAN4 6114 6167 6061 3250 Normal
FAN5 6061 6167 5859 3250 Normal
FAN6 6334 6334 6167 3250 Normal
FAN7 5908 5958 5810 3250 Normal
Voltage(V) Current MAX MIN Threshold Status
2.5 2.544 2.544 2.528 +/-10% Normal
1.25 1.232 1.232 1.232 +/-10% Normal
3.3 3.360 3.360 3.344 +/-8% Normal
12 11.916 11.916 11.916 +/-11% Normal
1.3 1.312 1.328 1.312 +/-10% Normal
1.25 1.248 1.248 1.248 +/-8% Normal
1.8 1.840 1.840 1.840 +/-10% Normal
BPS_12VIN -- -- -- +/--- Absent
ras>