Filter
Top Products
ES-3124PWR Ethernet Switch
29-22 Introducing the Commands
Table 29-4 Command Summary: config-vlan Commands
COMMAND DESCRIPTION
ip address inband-default
dhcp-bootp
release
Releases the dynamic in-band IP
address.
inband-default
dhcp-bootp renew
Updates the dynamic in-band IP
address.
inband-default
dhcp-bootp
Sets the dynamic in-band IP address.
inband-default
<ip-address>
<mask>
Sets a static in-band IP address and
subnet mask.
default-gateway
<ip-address>
Sets a default gateway IP address for
this VLAN.
<ip-address>
<mask>
manageable
Allows the switch to be managed using
this specified IP address.
<ip-address>
<mask>
Sets the IP address and subnet mask of
the switch in the specified VLAN for
packet loopback test.
29.9.5 interface Commands
The following commands are listed in configuration mode as “interface” switch commands; all are preceded with
the command interface.
Table 29-5 Command Summary: Interface
COMMAND DESCRIPTION
interface
<port-
list>
Enables a port or a list of ports
for configuration.
bandwidth-limit
Enables bandwidth limit on the
switch.
bandwidth-limit
egress
<Mbps>
Sets the maximum bandwidth
allowed
for outgoing traffic on the
switch.
bandwidth-limit
ingress
<Mbps>
Sets the maximum bandwidth
allowed for incoming traffic on
the switch.
broadcast-limit
Enables broadcast storm control
limit on the switch.
broadcast-limit <pkt/s>
Sets how many broadcast
packets the interface receives
per second.