Filter
Top Products
Chapter 4 Wizard Setup
ZyWALL USG 1000 User’s Guide
108
Figure 41 VPN Advanced Wizard: Step 5
The following table describes the labels in this screen.
4.8.8 VPN Advanced Wizard - Summary
This summary of VPN tunnel settings is read-only.
Name: Identifies the VPN connection (and the VPN gateway).
Table 21 VPN Advanced Wizard: Step 5
LABEL DESCRIPTION
Summary
Name This is the name of the VPN connection (and VPN gateway).
Secure
Gateway
This is the WAN IP address or domain name of the remote IPSec router. If this field
displays 0.0.0.0, only the remote IPSec router can initiate the VPN connection.
Pre-Shared
Key
This is a pre-shared key identifying a communicating party during a phase 1 IKE
negotiation.
Local Policy This is a (static) IP address and Subnet Mask on the LAN behind your ZyWALL.
Remote
Policy
This is a (static) IP address and Subnet Mask on the network behind the remote
IPSec router.
Remote
Gateway CLI
These commands set the matching VPN connection settings for the remote gateway.
If the remote gateway is a ZLD-based ZyWALL, you can copy and paste this list into
its command line interface in order to configure it for the VPN tunnel.
You can also use a text editor to save these commands as a shell script file with a
“.zysh” filename extension. Then you can use the file manager to run the script in
order to configure the VPN connection.
See the commands reference guide for details on the commands displayed in this
list.
Save Click Save to store the VPN settings on your ZyWALL.