Filter
Top Products
Appendix B Log Descriptions
ZyWALL USG 1000 User’s Guide
678
The cookie pair is :
0x%08x%08x /
0x%08x%08x
Indicates the initiator/responder cookie pair.
The IPSec tunnel "%s"
is already established
%s is the tunnel name. When dialing a tunnel, the tunnel is already
dialed.
Tunnel [%s] built
successfully
%s is the tunnel name. The phase-2 tunnel negotiation is complete.
Tunnel [%s] Phase 1
pre-shared key
mismatch
%s is the tunnel name. When negotiating phase-1, the pre-shared key
did not match.
Tunnel [%s] Recving
IKE request
%s is the tunnel name. The device received an IKE request.
Tunnel [%s] Sending
IKE request
%s is the tunnel name. The device sent an IKE request.
Tunnel [%s] IKE
Negotiation is in
process
%s is the tunnel name. When IKE request is already sent but still
attempting to dial a tunnel.
VPN gateway %s was
disabled
%s is the gateway name. An administrator disabled the VPN gateway.
VPN gateway %s was
enabled
%s is the gateway name. An administrator enabled the VPN gateway.
XAUTH fail! My name:
%s
%s is the my xauth name. This indicates that my name is invalid.
XAUTH fail! Remote
user: %s
%s is the remote xauth name. This indicates that a remote user’s
name is invalid.
XAUTH succeed! My
name: %s
%s is the my xauth name. This indicates that my name is valid.
XAUTH succeed! Remote
user: %s
%s is the remote xauth name. This indicate that a remote user’s name
is valid
Dynamic Tunnel
[%s:%s:0x%x:%s] built
successfully
The variables represent the phase 1 name, tunnel name, SPI and the
xauth name (optional). The phase-2 tunnel negotiation is complete.
Dynamic Tunnel
[%s:%s:0x%x:0x%x:%s]
rekeyed successfully
The variables represent the phase 1 name, tunnel name, old SPI, new
SPI and the xauth name (optional). The tunnel was rekeyed
successfully.
Tunnel
[%s:%s:0x%x:%s] built
successfully
The variables represent the phase 1 name, tunnel name, SPI and the
xauth name (optional). The phase-2 tunnel negotiation is complete.
Tunnel
[%s:%s:0x%x:0x%x:%s]
rekeyed successfully
The variables represent the phase 1 name, tunnel name, old SPI, new
SPI and the xauth name (optional). The tunnel was rekeyed
successfully.
Tunnel [%s:%s] Phase
1 pre-shared key
mismatch
The variables represent the phase 1 name and tunnel name. When
negotiating phase-1, the pre-shared keys did not match.
Tunnel [%s:%s]
Recving IKE request
The variables represent the phase 1 name and tunnel name. The
device received an IKE request.
Table 242 IKE Logs (continued)
LOG MESSAGE DESCRIPTION