Filter
Top Products
Chapter 20 IPSec VPN
ZyWALL USG 1000 User’s Guide
320
Each field is described in the following table.
20.6 SA Monitor Screen
You can use the SA Monitor screen to display and to manage active IPSec SA. To access this
screen, click VPN > IPSec VPN > SA Monitor. The following screen appears.
Table 98 VPN > IPSec VPN > Concentrator > Edit
LABEL DESCRIPTION
Name Enter the name of the concentrator. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
# This field is a sequential value, and it is not associated with a specific member in
the concentrator.
Member This field displays the name of each member in the concentrator.
Note: You must disable policy enforcement in each member. See
Section 20.3.2 on page 298.
Click the Popup icon to change this member in the group.
The following screen appears.
Figure 210 Network > IPSec VPN > Concentrator > Edit > Member
Add icon This column provides icons to add members to and remove members from the
concentrator.
To add a member to the concentrator, click the Add icon at the top of the column
to add the new member at the beginning of the list, or click the Add icon next to
an existing member to add the new member after the existing one. The web
configurator chooses a new member alphabetically. You can use the Popup icon
next to the new member to change this.
To remove a member from the concentrator, click on the Remove icon next to the
member. The web configurator confirms that you want to remove the member.
OK Click OK to save your changes in the ZyWALL.
Cancel Click Cancel to exit this screen without saving.