Filter
Top Products
Chapter 21 SSL VPN
ZyWALL USG 1000 User’s Guide
324
21.1.2 SSL Access Policy Limitations
You cannot delete an object that is used by an SSL access policy. To delete the object, you
must first unassociate the object from the SSL access policy.
21.2 SSL Access Privilege List
Click VPN > SLL VPN to open the Access Privilege screen. This screen displays a summary
of the SSL access policy(ies) you have configured.
Figure 212 VPN > SSL VPN > Access Privilege
The following table describes the labels in this screen.
Server
Addresses
Address Configure address objects for the IP addresses of the DNS and
WINS servers that the ZyWALL sends to the VPN connection
users.
VPN Network Address Configure an address object to specify which network segment
users are allowed to access through a VPN connection.
Table 100 Objects (continued)
OBJECT TYPE
OBJECT
SCREEN
DESCRIPTION
Table 101 VPN > SSL VPN > Access Privilege
LABEL DESCRIPTION
# This field displays the index number of the entry.
Name This field displays the descriptive name of the SSL access policy for identification
purposes.
User/Group This field displays the user account or user group name(s) associated to an SSL
access policy.
This field displays up to three names.
Application This field displays the descriptive name of the SSL application object this policy
uses.
Add icon This column provides icons to add, edit, and remove policies.
To add a new policy, click the Add icon at the top of the column.
To activate or disable the policy, click the Activate/Deactivate icon.
To edit a policy, click the Edit icon next to the policy.
To delete a policy, click the Remove icon next to the policy.
To rearrange a policy in the list, click the Move to N icon next to the policy.
Apply Click Apply to save the settings.
Reset Click Reset to discard all changes.