Filter
Top Products
Chapter 6 Tutorials
ZyWALL USG 1000 User’s Guide
140
6.3.7 Synchronize the Backup
1 Connect the backup to the same network as the master.
2 Click Device HA > Synchronize.
3 Type the password for synchronization in the Password field. Enter the IP address of the
master (on a secure network), and click Sync Now to get the configuration from the
master.
Figure 73 Device HA > Synchronize
You can also set up the backup to synchronize with the master at regular intervals.
6.4 User-Aware Access Control
You can configure many policies and security settings for specific users or groups of users.
This is illustrated in the following example, where you will set up the following policies. This
is a simple example that does not include priorities for different types of traffic. See Section
27.4 on page 380 for more on bandwidth management.
The users are authenticated by an external RADIUS server at 192.168.1.200.
First, set up the user accounts and user groups in the ZyWALL. Then, set up user
authentication using the RADIUS server. Finally, set up the policies in the table above.
The ZyWALL has its default settings.
Table 33 User-Aware Access Control Example
GROUP (USER) WEB SURFING
WEB
BANDWIDTH
MSN
LAN-TO-DMZ
ACCESS
Finance (Leo) Yes 200K No Yes
Engineer (Steven) Yes 100K No No
Sales (Debbie) Yes 100K Yes (M-F,
08:30~18:00)
Yes
Boss (Andy) Yes 100K Yes Yes
Guest (guest) Yes 50K No No
Others No --- No No