Filter
Top Products
Chapter 35 Addresses
ZyWALL USG 1000 User’s Guide
517
The following table describes the labels in this screen.
35.3 Address Group Screens
Use the Address Group summary screen and the Address Group Add/Edit screen, to
maintain address groups in the ZyWALL.
35.3.1 Address Group Summary
The Address Group screen provides a summary of all address groups. To access this screen,
click Object > Address > Address Group.
Figure 380 Object > Address > Address Group
Table 166 Object > Address > Address > Edit
LABEL DESCRIPTION
Name Type the name used to refer to the address. You may use 1-31 alphanumeric
characters, underscores(
_), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
Address Type Select the type of address you want to create. Choices are: HOST, RANGE, and
SUBNET.
IP Address This field is only available if the Address Type is HOST. This field cannot be blank.
Enter the IP address that this address object represents.
Starting IP
Address
This field is only available if the Address Type is RANGE. This field cannot be
blank. Enter the beginning of the range of IP addresses that this address object
represents.
Ending IP
Address
This field is only available if the Address Type is RANGE. This field cannot be
blank. Enter the end of the range of IP address that this address object represents.
Network This field is only available if the Address Type is SUBNET, in which case this field
cannot be blank. Enter the IP address of the network that this address object
represents.
Netmask This field is only available if the Address Type is SUBNET, in which case this field
cannot be blank. Enter the subnet mask of the network that this address object
represents. Use dotted decimal format.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.