Filter
Top Products
ZyWALL USG 1000 User’s Guide
75
CHAPTER 4
Wizard Setup
This chapter provides information on configuring the Wizard setup screens in the web
configurator. See the feature-specific chapters in this User’s Guide for background
information.
4.1 Wizard Setup Overview
" Use the wizards only for initial configuration starting from the default
configuration.
The web configurator's setup wizards help you configure Internet and VPN connection
settings.
" Changes you make in an installation or VPN wizard may not be applied if you
have already changed the ZyWALL’s configuration.
In the ZyWALL web configurator, click the Wizard icon to open the Wizard Setup
Welcome screen. The following summarizes the wizards you can select:
• INSTALLATION SETUP, ONE ISP
Click this link to open a wizard to set up a single Internet connection for Gigabit Ethernet
port 2. This wizard creates matching ISP account settings in the ZyWALL if you use
PPPoE or PPTP. See Section 4.2 on page 76.
• INSTALLATION SETUP, TWO ISP
Click this link to open a wizard to set up Internet connections for Gigabit Ethernet (ge)
interfaces 2 and 3. See Section 4.5 on page 93. You can connect one interface to one ISP
(or network) and connect the other to a second ISP (or network). You can use the second
WAN connection for load balancing to increase overall network throughput or as a backup
to enhance network reliability (see Section 11.3 on page 219 for more on load balancing).
This wizard creates matching ISP account settings in the ZyWALL if you use PPPoE or
PPTP. This wizard also creates a WAN trunk.
• VPN SETUP