Filter
Top Products
Chapter 44 Service Control
ZyWALL USG 1000 User’s Guide
601
The client automatically saves any new server public keys. In subsequent connections, the
server public key is checked against the saved version on the client computer.
2 Encryption Method
Once the identification is verified, both the client and server must agree on the type of
encryption method to use.
3 Authentication and Data Transmission
After the identification is verified and data encryption activated, a secure tunnel is
established between the client and the server. The client then sends its authentication
information (user name and password) to the server to log in to the server.
44.6.2 SSH Implementation on the ZyWALL
Your ZyWALL supports SSH versions 1 and 2 using RSA authentication and four encryption
methods (AES, 3DES, Archfour and Blowfish). The SSH server is implemented on the
ZyWALL for management using port 22 (by default).
44.6.3 Requirements for Using SSH
You must install an SSH client program on a client computer (Windows or Linux operating
system) that is used to connect to the ZyWALL over SSH.
44.6.4 Configuring SSH
Click System > SSH to change your ZyWALL’s Secure Shell settings. Use this screen to
specify from which zones SSH can be used to manage the ZyWALL. You can also specify
from which IP addresses the access can come.
" It is recommended that you disable Telnet and FTP when you configure SSH
for secure connections.
Figure 447 System > SSH