Filter
Top Products
ZyWALL USG 1000 User’s Guide
575
CHAPTER 43
System
This chapter provides information on the general system screens. See Chapter 44 on page 587
for details on the system screens that control service access.
43.1 System Overview
The system screens can help you configure general ZyWALL information, the system time
and the console port connection speed for a terminal emulation program. The screens also
allow you to configure DNS settings and determine which services/protocols can access which
ZyWALL zones (if any) from which computers.
43.2 Host Name
A host name is the unique name by which a device is known on a network. Click System >
Host Name to open the Host Name screen.
Figure 416 System > Host Name
The following table describes the labels in this screen.
Table 196 System > Host Name
LABEL DESCRIPTION
General
Settings
System Name Choose a descriptive name to identify your ZyWALL device. This name can be up to
64 alphanumeric characters long. Spaces are not allowed, but dashes “-” are
accepted.
Domain Name Enter the domain name (if you know it) here. This name is propagated to DHCP
clients connected to interfaces with the DHCP server enabled. This name can be up
to 254 alphanumeric characters long. Spaces are not allowed, but dashes “-” are
accepted.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.