Filter
Top Products
Chapter 43 System
ZyWALL USG 1000 User’s Guide
586
The following table describes the labels in this screen.
43.6 Language Screen
Click System > Language to open the following screen. Use this screen to select a display
language for the ZyWALL’s web configurator screens.
Figure 425 System > Language
The following table describes the labels in this screen.
Table 204 System > DNS > Service Control Rule Edit
LABEL DESCRIPTION
Address Object Select ALL to allow or deny any computer to send DNS queries to the ZyWALL.
Select a predefined address object to just allow or deny the computer with the IP
address that you specified to send DNS queries to the ZyWALL.
Zone Select ALL to allow or prevent DNS queries through any zones.
Select a predefined zone on which a DNS query to the ZyWALL is allowed or
denied.
Action Select Accept to have the ZyWALL allow the DNS queries from the specified
computer.
Select Deny to have the ZyWALL reject the DNS queries from the specified
computer.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving
Table 205 System > Language
LABEL DESCRIPTION
Language Setting Select a display language for the ZyWALL’s web configurator screens. You
also need to open a new browser session to display the screens in the new
language.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.