Filter
Top Products
Chapter 10 Wireless LAN
WAP3205 User’s Guide
103
10.4 General Wireless LAN Screen
Use this screen to enter the SSID, select the channel and enable intra-BSS traffic.
Note: If you are configuring the WAP3205 from a computer connected to the wireless
LAN and you change the WAP3205’s SSID, channel or security settings, you
will lose your wireless connection when you press Apply to confirm. You must
then change the wireless settings of your computer to match the WAP3205’s
new settings.
Click Network > Wireless LAN to open the General screen.
Figure 59 Network > Wireless LAN > General
The following table describes the general wireless LAN labels in this screen.
Table 29 Network > Wireless LAN > General
LABEL DESCRIPTION
Wireless Setup
Wireless LAN This is turned on by default.
The current wireless state is reflected in this field.
Network
Name(SSID)
or
Name(SSID1
~3)
The SSID (Service Set IDentity) identifies the Service Set with which a
wireless client is associated. Enter a descriptive name (up to 32 printable
characters found on a typical English language keyboard) for the wireless
LAN.
You can configure up to four SSIDs to enable multiple BSSs (Basic Service
Sets) on the WAP3205. This allows you to use one access point to provide
several BSSs simutaneously. You can then assign varying security types to
different SSIDs. Wireless clients can use different SSIDs to associate with
the same access point.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a
wireless client cannot obtain the SSID through scanning using a site
survey tool.