Filter
Top Products
Chapter 5 Universal Repeater Mode
WAP3205 User’s Guide
50
5.6 Universal Repeater Screen
Use this screen to enter the SSID and select the wireless security mode used by
the wireless device to which you want to connect. Go to Configuration >
Wireless LAN > Universal Repeater to open the Universal Repeater screen.
The screen varies depending on security mode.
Note: To have wireless clients access or acquire an IP address from another access
point or wireless router (B) through the WAP3205 (A) in universal repeater
mode, you must set the channel number in the Wireless LAN > General
screen to be the same as the one on the wireless router or AP to which the
WAP3205 wants to connect.
Memory Usage This shows what percentage of the heap memory the WAP3205 is using.
System Setting
Configuration Mode This shows the web configurator mode you are viewing - Expert.
Summary
Packet Statistics
Click Details... to go to the Monitor > Packet Statistics screen
(Section 9.4 on page 96). Use this screen to view port status and packet
specific statistics.
WLAN Station Status
Click Details... to go to the Monitor > WLAN Station Status screen
(Section 9.5 on page 98). Use this screen to view the wireless stations
that are currently associated to the WAP3205.
Table 13 Status Screen: Universal Repeater Mode
LABEL DESCRIPTION
A
B