Filter
Top Products
Chapter 8 Tutorials
WAP3205 User’s Guide
77
8.4 Enabling and Configuring Wireless Security
(No WPS)
This example shows you how to configure wireless security settings with the
following parameters on your WAP3205.
Follow the steps below to configure the wireless settings on your WAP3205.
The instructions require that your hardware is connected (see the Quick Start
Guide) and you are logged into the Web Configurator through your LAN connection
(see Section 6.2 on page 55).
1 Open the Wireless LAN > General screen in the AP’s Web Configurator.
2 Enter SSID_Example3 as the SSID and select a channel or select Auto Channel
Selection to have the WAP3205 scans for and select an available channel
automatically. Click Apply.
Figure 48 Tutorial: Network > Wireless LAN > General
3 Click the Security tab.
SSID SSID_Example3
Channel Auto
Security WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)