Filter
Top Products
Chapter 8 Tutorials
WAP3205 User’s Guide
86
10 Go to Configuration > Network > Wireless LAN > Universal Repeater to
connect the WAP3205 wirelessly to an AP. Select Enable. Enter the SSID of the
existing AP or wireless router to which you want to connect (“SSIDofMyAP” in this
example). Enter the wireless security settings which are the same as those on the
existing AP or wireless router to access it (WPA-PSK and
“KeyofMyWirelessNetwork” in this example). Click Apply.
11 Set the channel number in the Wireless LAN > General screen to be the same
as the one on the wireless router or AP to which the WAP3205 is connecting. This
allows wireless clients access or acquire an IP address from another AP or wireless
router through the WAP3205 in universal repeater mode.