Filter
Top Products
Chapter 4 Client Mode
WAP3205 User’s Guide
42
The following table describes the labels in this screen. .
4.7 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to
Configuration > Wireless LAN > Site Survey to open the following screen.
Figure 16 Client Mode: WLAN > Site Survey
Table 10 Client Mode: WLAN > Profile: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Wireless Setup
Profile Name Enter a descriptive name for this profile.
Network Name
(SSID)
Enter the name of the access point to which you are connecting.
Security
Security Mode Select WPA-PSK or WPA2-PSK to add strong security on this wireless
network.
Encryption Type Select the type of wireless encryption employed by the access point to
which you want to connect.
Pre-Shared Key WPA-PSK or WPA2-PSK uses a simple common password for
authentication.
Type the pre-shared key employed by the access point to which you
want to connect.
Apply Click Apply to save your changes back to the WAP3205.
Cancel Click Cancel to go back to the previous screen.